Olivia Sliding Door May 03rd, 2018 - 13:14:44
TIMBER You can choose from a number of engineered timber folding sliding doors including softwood or hardwoods such as Meranti and European Oak. Timber is normally engineered or laminated to ensure it is structurally resistant to warping or twisting and doors are normally available with either a factory applied translucent stain or RAL colour paint finish. As timber is a natural insulator timber folding sliding doors offer the most energy efficient solution when combined with high performance double glazing offering U values as low as 1.4. Timber folding doors usually provide slim sight lines as the individual door panels are normally hinged off each other without the use of additional mullions between each panel and therefore maximising visible glass areas.
Not all patio doors are designed for outdoor use. The purpose of the interior type is to join one room to another. They separate one room from another when closed and offer access to the rooms when opened. Single or Multiple Glass Panes True French doors feature several glass panes divided by muntins made from wood. The glass panes are built separately. In other words, if you place an order for one with 10 wooden doors, they will build it with 10 individual panes, and the panes will be inserted independently. If you want, you can go for this type, but the majority of vendors sell ones with panes that are divided by faux. They feature snap-in wooden grilles, and look very beautiful. However, the cost of making them is lesser. Plus, they are easier to clean when compared to the true divided panes.
Aluminum slide doors uses thermally broken, strong and durable aluminum for this purpose. Such doors have been used in hotels and restaurants since many years. They are the older forms of sliding doors that have been used in both commercial and domestic areas. The system designed for the purpose uses top that has guide rollers and all the weight is put to the bottom. This way smooth operation of opening and closing of door is achieved. It is still one of the most demanded materials for sliding doors as they dont require much maintenance. Plastic or PVC is another popular choice in sliding doors since they are the latest ones. The cost of doors with plastic is the least as compared to other materials. They are the best choice when there is demand of affordable and long lasting doors. At times you will have to compromise with the quality of plastic if you want a good design.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.