Olivia Sliding Door May 03rd, 2018 - 13:15:48
In recent times, folding sliding doors have increased in popularity amongst homeowners the world over. Folding sliding doors enable you to open up a larger part of the wall which may have previously only had a smaller French door. Folding sliding doors are available in a range of construction materials including timber or wood, glass, aluminum or PVC. These doors may be opened either outwards or inwards. If you do decide to go for glass folding sliding doors, it is advisable to select folding sliding doors that are made from toughened glass which will provide you with adequate security and safety. In certain cases, you may find that toughened glass may also be a requirement for building regulations as well. Glass folding doors are ideal for use as patio doors.
Aluminum is a popular choice for this type of folding door as it is virtually maintenance free, hard wearing and good looking. Aluminum folding sliding doors are available in over 200 different RAL paint finishes which can usually be specified in your choice of matt, silk or gloss finish. It is also possible to specify dual colours with a different colour internally and externally. UPVC Also referred to as plastic or PVC-u folding sliding doors this type of door is relatively new in the market place when compared to aluminum or timber. Due to its comparative low cost uPVC door manufacturers have quickly adapted their existing uPVC door profiles to create bi folding doors in response to an increasingly growing market that required a more affordable folding door system. uPVC folding sliding doors can be substantially cheaper than their aluminum or timber counterparts but there is often a trade-off in design elements that can sometimes compromise the quality of the product.
Although the original concept of a folding sliding door dates back over 100 years where they were often used for closing off small storage areas todays folding sliding doors are designed to be high performance energy efficient patio doors using the latest innovative insulation features in both door and glazing construction. Folding sliding doors not only allow wider unobstructed apertures but the increased glass area allows huge flows of natural light to enter the home from the outside which during the colder months will provide efficient use of solar gain to minimise heating costs. Doors are available in a choice of materials including timber, aluminium and PVC-u together with a choice of colours and finishes that will enhance any home.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.