Home / Sliding Door / beautiful sliding glass door key lock that you must have / Keyed Locking Devices For Sliding Glass Doors (patio Doors) Outside Key Lock For Sliding Glass Door Sliding Glass Door Latch Types Of Sliding Glass Door Locks
Olivia Sliding Door April 18th, 2018 - 12:41:15
Let us look in to the two main types of doors available today. Top hung Sliding Doors This is the most commonly used type of sliding doors. They are used in commercial places and homes as well. Two trolley hangers are used to hang the door at the top. The hangers take all the weight of the door, which makes the door slide easily without any problems. Track stoppers are fixed on the concealed tracks at both ends. They are responsible to hold the doors at both ends on the track. This type has the maximum weight limit depending on the trolley hangers used. This is the reason most suppliers provide door weights. In simple words, the size of the door matters when using top hung doors.
One can always add mirrors to doors already in place on closets but it is highly recommended that the doors be replaced with a mirrored sliding door kit, which proves better for long-term usage and safety. New mirrored sliding doors are safer in comparison to merely attaching a mirror to the door on the closet. When performing a home improvement project such as this, homeowners should always ensure they do the projects right in the first place. Mistakes can prove costly when trying to install new closet doors, regardless of the types of doors one is trying to install.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Aluminum is a popular choice for this type of folding door as it is virtually maintenance free, hard wearing and good looking. Aluminum folding sliding doors are available in over 200 different RAL paint finishes which can usually be specified in your choice of matt, silk or gloss finish. It is also possible to specify dual colours with a different colour internally and externally. UPVC Also referred to as plastic or PVC-u folding sliding doors this type of door is relatively new in the market place when compared to aluminum or timber. Due to its comparative low cost uPVC door manufacturers have quickly adapted their existing uPVC door profiles to create bi folding doors in response to an increasingly growing market that required a more affordable folding door system. uPVC folding sliding doors can be substantially cheaper than their aluminum or timber counterparts but there is often a trade-off in design elements that can sometimes compromise the quality of the product.