Olivia Sliding Door April 17th, 2018 - 13:08:04
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Lubricate the tracks - Apart from ensuring that the sliding door tracks and rollers are clean, you should also apply lubrication to the lower and upper tracks for a free operation. You can also lubricate the door lock using an aerosol lubricant so you can flush out grime and coat moving parts within it. You would need to disassemble the lock to lubricate it; you can have a professional do it for you if you are not very sure. Install a commercial lock - Commercial entrance sliding doors deserve a commercial lock to improve reliability and security. The lock can be used as a replacement for the latch lock or supplement for the same and can be installed at any given door height and adjusted accordingly. The locks feature two or one bolt locking systems which attach to closure points and steel bolts that drop right into place. You can also go a step further to wire an alarm system to the door.
4. Markerdoor™ Closet - A bi-fold covered in marker board for the amusement and creative encouragement of your childs imagination. These doors look clean and playful. Any child would love to have them. Who doesnt want to write on the walls? 5. French - Normally these doors pivot on hinges but they have been modified to slide. They give you the look of a French door with the space saving feature of a sliding door. 6. Sliding glass doors - usually used as separators between an interior room, like a kitchen and an exterior room, like a porch; stickers optional. 7. Arcadia - a popular style of sliding door. These doors are basically just a bypass door made out of glass.
Built-in wardrobes offer convenience to many households. A built-in wardrobe saves up a lot of space and gives your home a less crowded feel, no matter how small your home is. Another great feature of wardrobes is that they can be fully customized to whatever design you want and need for your house. One of the things you can customize is the door of your wardrobe. Your wardrobe door is bought separately from the built-in wardrobe set. If youre building your wardrobe yourself, its best to shop around for the best door that would fit your wardrobe. Sliding doors are more preferred than the usual swing doors with built-in wardrobes. This is because it maximizes the space that you have in your room. They are also tougher and less prone to damage and accidents. There are several types of sliding doors that you can install on your built-in wardrobe: