Olivia Sliding Door April 17th, 2018 - 13:13:17
Let us look in to the two main types of doors available today. Top hung Sliding Doors This is the most commonly used type of sliding doors. They are used in commercial places and homes as well. Two trolley hangers are used to hang the door at the top. The hangers take all the weight of the door, which makes the door slide easily without any problems. Track stoppers are fixed on the concealed tracks at both ends. They are responsible to hold the doors at both ends on the track. This type has the maximum weight limit depending on the trolley hangers used. This is the reason most suppliers provide door weights. In simple words, the size of the door matters when using top hung doors.
Take out the dimensions of the dimensions where you want to get a door. Make sure that the base and sides are leveled and there is nothing coming in the way. Then take your information to a lumberyard or local home improvement association so that you have a customized door with slide mechanism. There you will have a wide variety to choose from. There are finished as well as unfinished sliding doors available. You should choose the one that is best for your home décor and matches the dimensions of your location. A track is first installed on the location of the door and it is hidden with the decorative item like wood moldings. Also purchase the equipment for installing the sliding door. After bringing the correct sized sliding door in your house.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
The sliding door system was invented to fit large openings for glass. These systems are manufactured for sliding doors to help meet the specific needs of homeowners and are manufactured in clad or wood frames with various colors to choose from. The system was designed to keep water and air out of the space while proving sturdy for fitting glass. Homeowners can enjoy a sliding door system in rooms that open to the outside while understanding that water will not be allowed to seep or drip inside the interior of the home. Panels are hinged together in a train-like feature coming off the side jams if needed. The panels can be configured numerous ways allowing for openings where desired.