Home / Sliding Door / fab pocket sliding glass doors image / Multi Track Sliding Glass Doors Exterior Sliding Pocket Doors Cost Sliding Glass Doors That Slide Into The Wall Exterior Pocket Sliding Glass Doors 16 Foot Sliding Glass Door Prices
Olivia Sliding Door April 21st, 2018 - 13:33:08
Lubricate the tracks - Apart from ensuring that the sliding door tracks and rollers are clean, you should also apply lubrication to the lower and upper tracks for a free operation. You can also lubricate the door lock using an aerosol lubricant so you can flush out grime and coat moving parts within it. You would need to disassemble the lock to lubricate it; you can have a professional do it for you if you are not very sure. Install a commercial lock - Commercial entrance sliding doors deserve a commercial lock to improve reliability and security. The lock can be used as a replacement for the latch lock or supplement for the same and can be installed at any given door height and adjusted accordingly. The locks feature two or one bolt locking systems which attach to closure points and steel bolts that drop right into place. You can also go a step further to wire an alarm system to the door.
Homeowners can install mirrored sliding doors on their own while avoiding install fees, which can rack up quickly. Ensure that the bottom and top track is installed. By-pass sliding doors prove easier to install in comparison to bi-fold closet doors. The bi-fold closet doors needs a tighter fit due to the opening of the closet normally being square. If one is attempting to install a bi-fold door in a square opening, the drywall jams will not be consistent. This will cause the doors to not open or close easily, however, there will be horrible looking gaps, which is something that homeowners do not want to see after installing new closet doors.
Install slide locking bar - After a long day of automatic door operations, you will need to lock up your doors and have a peaceful nights sleep. By installing a slide locking bar to your sliding doors, you will take security a level higher in your premises. This is usually a metal bar or wood dowel cut to fit on bottom door track. When fitted, it prevents the door open even with the latching lock removed or damaged. Most new sliding door models come secured along the length of the frame so they are more secure even with all the convenience they offer. Maintain and care for the rollers and door tracks - Remember that sliding doors rely on rollers to move back and forth and if they get damaged, then it will be hard for the doors to operate smoothly. Clear out any debris and dirt along the tracks and make any size adjustments if need be. Some of these doors come with adjustment holes on top or bottom edges and you can easily compress or expand the rollers for a smoother operation. The tracks should always be in top shape so it does not become easy for intruders to lift doors off the track and bypassing locks you may have present.
Aluminum is a popular choice for this type of folding door as it is virtually maintenance free, hard wearing and good looking. Aluminum folding sliding doors are available in over 200 different RAL paint finishes which can usually be specified in your choice of matt, silk or gloss finish. It is also possible to specify dual colours with a different colour internally and externally. UPVC Also referred to as plastic or PVC-u folding sliding doors this type of door is relatively new in the market place when compared to aluminum or timber. Due to its comparative low cost uPVC door manufacturers have quickly adapted their existing uPVC door profiles to create bi folding doors in response to an increasingly growing market that required a more affordable folding door system. uPVC folding sliding doors can be substantially cheaper than their aluminum or timber counterparts but there is often a trade-off in design elements that can sometimes compromise the quality of the product.