Home / Sliding Door / fab sliding glass door parts image / Sliding Glass Door Lock Replacement Sliding Glass Door Track Repair Parts Sliding Glass Door Handles Home Depot Sliding Glass Door Roller Assembly
Olivia Sliding Door April 15th, 2018 - 13:24:00
Sliding doors are an evolution from the traditional hinged doors. They are set in tracks and open sideways. They have a number of advantages and benefits that you may find just right for your home. They are stylish and functional ways of making an entrance or exit for a room. With the numerous designs and materials that make up these types of doors, you are sure to find the perfect match to your home. Check out these sliding door advantages to help you decide whether a sliding door is indeed right for you. There are different types to choose from that will definitely fit into any type of room you have. Pocket slide doors have a space built into the wall for it to slide into when opened. This is mostly used in small spaces where hinged-type doors become inefficient. The Arcadia type has one panel fixed while another panel slides by it either in front or at the back. Bypass slide doors are designed to open the full width of the frame and are commonly used for closets but are also great room doors. Bi fold doors are also sliding-type doors that have several panels hinged together. Once you open it sideways, the panels fold up on each other.
There are numerous benefits of the sliding door system: The system allows swinging the doors for opening and closing. Flexible doors can be fully or partially open to enjoy the sunshine and allow air to flow into the home from the outside. A single door can be created with the number of panels, which stack to one side as a space saving feature. The system is easy to use allowing fast, easy usage of the door when opening or closing.Outward and inward options are available with the sliding door system. Variations consist of center pivot options and paired panel configurations. Homeowners should always ensure that they are familiar with the number of panels in wall openings, which will determine the height, and width of the panels as well as the design. There is a maximum limit of six hinged panels with the system that stacks to one side while allowing a maximum width of thirty-six feet for exterior usage and forty feet for interior usage. If you want to utilize a top-hung door system minus unhinged panels, the number of panels is unlimited.
In this type, additional guides are used to prevent it from swinging sideways. The clear threshold guiding is the most commonly used type. This is a plastic guide that is fixed to the surface mainly in the mid range of the track. This prevents it from swinging sideways. In order to prevent lateral movements on it, a groove is cut the bottom that will above the guide install. It is same case with a glass door as well. Indeed, most of the sliding doors used worldwide are made on glass. The glass ones also run through the guide making easy movements. As mentioned above, this is the most commonly used doors in the world. Bottom Rolling Sliding Doors This is the second type of sliding doors used nowadays. This type is used in cases where the top hung doors cannot be used due to weight problems and other reasons. Two rollers are fixed at the bottom of the door. The rollers help the door move smoothly on the track. At the same time, these are guided on the same channel with the help the guides at the top. in this case, all the weight of the door is on the two rollers at the bottom. This makes it harder to open and close. This is the main reason people across the world prefer the top hung ones.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.