Olivia Sliding Door April 20th, 2018 - 08:08:33
These interior doors are not new inventions. Mirrored sliding doors have been around for many years. The doors have evolved from simply placing a large mirror on a closet door with special clips. The evolvement of mirrored closet doors also entails more new and innovative ways in allowing the mirror to show when the closet doors were closed. The old version of these doors hid the mirror from view when closed. Now, the mirrored doors contain beveled edges and grooves which provide more modern looks while allowing the mirror to be viewed at all times, whether the closet is closed or open.
There may be a few technical differences but logically they work the same, sometimes called a patio door when they open to the outside. 8. Bypass - the same as mirror bypass doors, without the reflective bits. 9. Louvered or shuttered doors are commonly installed for use with storage closets, utility rooms and pantries. They usually have two that bend inward when you open them, like a cats hind leg, and have the look of functional shutters. 10. Pocket - These bedroom sliding doors are used mostly for spaces that wont fit a hinged door. These slide into the interior of the wall and are sometimes difficult to pull back out if you dont know how to work the little flap of metal that makes up the handle.
Sliding-type doors are not just limited to doorways but are also installed as cabinet doors, closet doors, and balcony or patio doors and also as room dividers. They are built with different materials such as metals and glass. Glass gives the illusion of a bigger space since it lets you look over to the other side. Sliding-type doors may be all clear, frosted, translucent and may have etchings or printed designs. Customization for sliding doors is endless. Slide doors never go out of style. Since they are functional and highly customizable, they will never be passé. Getting a slide-type door is easy to maintain and can easily blend in with the theme of the room. Whether in a modern or traditional setting, sliding-type doors will still be able to blend in. Should you wish to change the design, there are easy tips and tricks on how to jazz up an old sliding door to make it look new again.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.