Olivia Sliding Door May 03rd, 2018 - 13:17:41
In recent times, folding sliding doors have increased in popularity amongst homeowners the world over. Folding sliding doors enable you to open up a larger part of the wall which may have previously only had a smaller French door. Folding sliding doors are available in a range of construction materials including timber or wood, glass, aluminum or PVC. These doors may be opened either outwards or inwards. If you do decide to go for glass folding sliding doors, it is advisable to select folding sliding doors that are made from toughened glass which will provide you with adequate security and safety. In certain cases, you may find that toughened glass may also be a requirement for building regulations as well. Glass folding doors are ideal for use as patio doors.
Adapting bulky wide uPVC steel reinforced profiles that were originally designed for traditional hinged external doors meant glass sight lines were considerably reduced and the doors used ugly face fixed hinges and exposed gearing which also sometimes posed a security hazard. However, some manufacturers have started to introduce the next generation of uPVC folding doors using slimmer profiles and concealed gearing that compare favourably with those of timber and aluminium. Heavy steel profile reinforcement is starting to be replaced by lighter yet stronger recycled composite material that is also much more energy efficient.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
The sliding door system was invented to fit large openings for glass. These systems are manufactured for sliding doors to help meet the specific needs of homeowners and are manufactured in clad or wood frames with various colors to choose from. The system was designed to keep water and air out of the space while proving sturdy for fitting glass. Homeowners can enjoy a sliding door system in rooms that open to the outside while understanding that water will not be allowed to seep or drip inside the interior of the home. Panels are hinged together in a train-like feature coming off the side jams if needed. The panels can be configured numerous ways allowing for openings where desired.