Olivia Sliding Door October 03rd, 2017 - 13:40:00
Ask the manufacturer for advices on installing this door like from top to down. Instead of attaching them with hinges you will have to attach wheels on the sides of the doors so that they easily slide back and forth.After doing the above procedures, move your sliding door a couple of times and check whether any adjustment needs to be made or not. Make sure if the adjustments needs to be made in the door or in the track. Then get done with it and make your sliding door smoother. These doors will surely look elegant in your house. However, if you have children at your house then you need to be careful as they like to slide the doors a lot and there are chances that their fingers might get stuck in this process.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Although the original concept of a folding sliding door dates back over 100 years where they were often used for closing off small storage areas todays folding sliding doors are designed to be high performance energy efficient patio doors using the latest innovative insulation features in both door and glazing construction. Folding sliding doors not only allow wider unobstructed apertures but the increased glass area allows huge flows of natural light to enter the home from the outside which during the colder months will provide efficient use of solar gain to minimise heating costs. Doors are available in a choice of materials including timber, aluminium and PVC-u together with a choice of colours and finishes that will enhance any home.
TIMBER You can choose from a number of engineered timber folding sliding doors including softwood or hardwoods such as Meranti and European Oak. Timber is normally engineered or laminated to ensure it is structurally resistant to warping or twisting and doors are normally available with either a factory applied translucent stain or RAL colour paint finish. As timber is a natural insulator timber folding sliding doors offer the most energy efficient solution when combined with high performance double glazing offering U values as low as 1.4. Timber folding doors usually provide slim sight lines as the individual door panels are normally hinged off each other without the use of additional mullions between each panel and therefore maximising visible glass areas.