Olivia Sliding Door April 22nd, 2018 - 14:30:28
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturers coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown. Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.
Many grille types feature gridwork of panes in pairs of 6, 8 or 10, for instance. They gridwork is evenly-spaced. Other types feature panes that are horizontal panes, and they can be 4, 5 or 6 in number. You can also find grill configurations that feature different styles. The Size As far as the width of the doors is concerned, you will see that most of them have a width of 60 inches and a height of 60 inches. If you want to order some with different measurements, you may have to be willing to pay a lot more. Usually, the thickness of these doors is 1 ¾ or 1 3/8 inches. Aside from the conventional 6 feet and 8 inch height, you may also finder some that measure 6 feet 11 inch in height and up to 8 feet in width. Moreover, some doors have windows on the side panes, and others have windows on the tops. So, if you are looking for sliding doors to meet your needs, you may want to re-read this article to equip yourself with the type you actually want. Hope this helps.
Lubricate the tracks - Apart from ensuring that the sliding door tracks and rollers are clean, you should also apply lubrication to the lower and upper tracks for a free operation. You can also lubricate the door lock using an aerosol lubricant so you can flush out grime and coat moving parts within it. You would need to disassemble the lock to lubricate it; you can have a professional do it for you if you are not very sure. Install a commercial lock - Commercial entrance sliding doors deserve a commercial lock to improve reliability and security. The lock can be used as a replacement for the latch lock or supplement for the same and can be installed at any given door height and adjusted accordingly. The locks feature two or one bolt locking systems which attach to closure points and steel bolts that drop right into place. You can also go a step further to wire an alarm system to the door.
These interior doors are not new inventions. Mirrored sliding doors have been around for many years. The doors have evolved from simply placing a large mirror on a closet door with special clips. The evolvement of mirrored closet doors also entails more new and innovative ways in allowing the mirror to show when the closet doors were closed. The old version of these doors hid the mirror from view when closed. Now, the mirrored doors contain beveled edges and grooves which provide more modern looks while allowing the mirror to be viewed at all times, whether the closet is closed or open.