Home / Sliding Door / impressive sliding patio doors with blinds photos / Sliding Glass Doors With Built In Blinds French Doors With Blinds Inside Double Sliding Patio Doors French Doors With Blinds Between The Glass
Olivia Sliding Door April 22nd, 2018 - 14:36:12
Are you planning to buy sliding doors, and dont know if you should go for patio doors or sliding ones? If so, we may help you. The basic difference between a patio door and a sliding door is that a patio one swings while a sliding one slides. Typically, a sliding door features a matching panel and a sliding panel. The matching panel slides in the bottom and top tracks. On the other hand, a patio door is a pair of doors and features a fixed panel and a hinged panel. Based on the type you want to buy, it will either swing outward or inward. Lets find out more about it. At times, patio doors are also referred to as French doors. They feature a pair of patio doors hinging at the opposite sides. When opened, they show a large entrance. Normally, patio doors and sliders are bought as a complete system, which includes threshold, jambs and other essential weather-stripping. For energy saving, they tend to interlock.
In addition to being aesthetically pleasing, the types of doors that you select should be functional, provide insulation and security to your home, as well as enhance its overall appearance. Choosing a good set of folding sliding doors will also work in increasing the value of your home later on should you decide to sell it. Folding sliding doors can enable you to enjoy unobstructed openings of up to six meters or even more, seeing as the panels are able to fold, slide and neatly stack to one side or both sides of the aperture. A good set of folding doors are ideal for providing access to a balcony or garden, enabling you to save on limited space, while also remaining stylish.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Install slide locking bar - After a long day of automatic door operations, you will need to lock up your doors and have a peaceful nights sleep. By installing a slide locking bar to your sliding doors, you will take security a level higher in your premises. This is usually a metal bar or wood dowel cut to fit on bottom door track. When fitted, it prevents the door open even with the latching lock removed or damaged. Most new sliding door models come secured along the length of the frame so they are more secure even with all the convenience they offer. Maintain and care for the rollers and door tracks - Remember that sliding doors rely on rollers to move back and forth and if they get damaged, then it will be hard for the doors to operate smoothly. Clear out any debris and dirt along the tracks and make any size adjustments if need be. Some of these doors come with adjustment holes on top or bottom edges and you can easily compress or expand the rollers for a smoother operation. The tracks should always be in top shape so it does not become easy for intruders to lift doors off the track and bypassing locks you may have present.