Olivia Sliding Door April 18th, 2018 - 12:28:35
Interior sliding doors when comparing them to "conventional doors", are user-friendly, easy to install and prove easy to maintain. Homeowners are jumping at the chance to prove individuality within their homes. The sliding door is not only individualistic in style and design but it makes sense to have a product such as this in the home that not only adds creative flair but helps with adding space to rooms within the home. Some homeowners have discovered interior glass partitions. If one wants to give privacy to a room, the glass sliding doors are not good choices. If homeowners want to add elegance and style to rooms, these types of sliding doors are wonderful choices. One should always ensure that they seek out glass partitions that are made with great quality. These products come with warranties but when you purchase a quality sliding glass door partition, quality does matter. Do not purchase one of these products made with low quality because even with a warranty involved, they quite simply do not last long. Low quality interior glass sliding doors are not worth the investment.
TIMBER You can choose from a number of engineered timber folding sliding doors including softwood or hardwoods such as Meranti and European Oak. Timber is normally engineered or laminated to ensure it is structurally resistant to warping or twisting and doors are normally available with either a factory applied translucent stain or RAL colour paint finish. As timber is a natural insulator timber folding sliding doors offer the most energy efficient solution when combined with high performance double glazing offering U values as low as 1.4. Timber folding doors usually provide slim sight lines as the individual door panels are normally hinged off each other without the use of additional mullions between each panel and therefore maximising visible glass areas.
A simple solution to this problem is to use a sliding door track kit. These kits are available almost anywhere, from a local hardware store to a large chain store and even online. They are relatively inexpensive and will make your door work like it did when new. The new track is made of stainless steel, which is a more durable and longer lasting metal. In addition, it will not corrode, so your track will last you for years to come. While your door is off, it mint be beneficial to replace the roller as well, to ensure smooth opening and closing. Once you purchase the kit and the new roller cartridge, here are so simple and easy steps to perform to repair your track.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.