Home / Sliding Door / shocking accordion sliding doors picture / Accordion Doors Menards Vinyl Accordion Doors Track Mounted Accordion Doors And Room Dividers Accordion Doors Ikea Wood Accordion Doors
Olivia Sliding Door April 18th, 2018 - 12:42:06
The huge growth in demand for folding sliding doors over the last two or three years has led to a rapid increase in the choice of door systems available for the consumer. Also referred to as bi fold doors, bi folding doors, multi fold doors and concertina doors they are best known as folding sliding doors because of the opening action itself. This type of door can provide unobstructed openings of up to 6 metres and sometime more as the panels simply fold, slide and stack neatly to one side or both sides of the aperture. Folding sliding doors are an ideal replacement for existing French or sliding patio doors where they can literally transform the existing opening and open up the room to the outside. This type of bi folding door is now becoming the most sought after door style for new build and home extensions whilst also proving a popular upgrade choice for homeowners adding a conservatory to their property due to their ability to seamlessly merge the new conservatory with the garden effectively bringing the outside inside.
A simple solution to this problem is to use a sliding door track kit. These kits are available almost anywhere, from a local hardware store to a large chain store and even online. They are relatively inexpensive and will make your door work like it did when new. The new track is made of stainless steel, which is a more durable and longer lasting metal. In addition, it will not corrode, so your track will last you for years to come. While your door is off, it mint be beneficial to replace the roller as well, to ensure smooth opening and closing. Once you purchase the kit and the new roller cartridge, here are so simple and easy steps to perform to repair your track.
Homeowners can install mirrored sliding doors on their own while avoiding install fees, which can rack up quickly. Ensure that the bottom and top track is installed. By-pass sliding doors prove easier to install in comparison to bi-fold closet doors. The bi-fold closet doors needs a tighter fit due to the opening of the closet normally being square. If one is attempting to install a bi-fold door in a square opening, the drywall jams will not be consistent. This will cause the doors to not open or close easily, however, there will be horrible looking gaps, which is something that homeowners do not want to see after installing new closet doors.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.