Olivia Sliding Door May 03rd, 2018 - 13:13:39
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Timber is a natural sustainable material that is very energy efficient but will require regular maintenance over the life time of the door to maintain their stain or paint finish. ALUMINIUM Aluminium folding sliding doors are normally manufactured from durable, strong thermally broken aluminium profiles that have specifically been designed for the purpose. These systems have been in use for several years in both domestic and commercial installations such as restaurants and hotels. Most systems utilise bottom rolling gear so all the weight is carried at the bottom with guide rollers at the top and panels are often connected to sliding and floating mullions which help ensure the door operates smoothly and effortlessly.
In recent times, folding sliding doors have increased in popularity amongst homeowners the world over. Folding sliding doors enable you to open up a larger part of the wall which may have previously only had a smaller French door. Folding sliding doors are available in a range of construction materials including timber or wood, glass, aluminum or PVC. These doors may be opened either outwards or inwards. If you do decide to go for glass folding sliding doors, it is advisable to select folding sliding doors that are made from toughened glass which will provide you with adequate security and safety. In certain cases, you may find that toughened glass may also be a requirement for building regulations as well. Glass folding doors are ideal for use as patio doors.
Aluminum is an ideal choice for your folding sliding doors as these provide better access than PVC, come with narrower frames and have smaller profiles than wooden frames, thus allowing for unrestricted views. If you are working on a tight budget, you may want to go for the less expensive softwood rather than hardwood. However, hardwood is a more preferable option as it provides better insulation and is much more durable, being able to withstand the vagaries of harsh weather. When selecting the rollers for your folding doors, a good choice of material would be nylon. Unlike steel which is likely to cause wear and tear to your runners, nylon rollers are not likely to cause this and are also less expensive and easier to replace than the runners themselves.