Olivia Sliding Door April 21st, 2018 - 13:39:47
The hardware system of a sliding door system is innovative and simple to use. The design of the hardware enables large doors to appear the same as standard sized doors. This is important for easy handling and conformability, which homeowners crave. The hardware of this system separates the sliding feature and the locking actions of the doors while allowing the large doors open and close easily. The door system easily locks while engaging the weather stripping, which keeps the bad weather outside, and the interior dry. The main door panel for this system unlocks the doors while lifting off the weather stripping with the rollers in the system. Homeowners tend to worry about the weight support of this product but the top track supports the weight of the door so you do not have to worry about doors crashing down due to weight issues. The sliding door system is manufactured to operate on tracks, which are installed on the sill or the head. The door panels are hinged together with sliding and folding hardware that allows for swinging the panels open or closed. The panels can even be folded back into other panels with this system as well. Homeowners will not be disappointed with the investment into this type of door system for their home. Not only is the product affordable but it also allows for creativity and flair in combining the outdoors with the indoors. Once installed in the home, it also increases the homes value and is great if one ever want to place your home on the market.
One can always add mirrors to doors already in place on closets but it is highly recommended that the doors be replaced with a mirrored sliding door kit, which proves better for long-term usage and safety. New mirrored sliding doors are safer in comparison to merely attaching a mirror to the door on the closet. When performing a home improvement project such as this, homeowners should always ensure they do the projects right in the first place. Mistakes can prove costly when trying to install new closet doors, regardless of the types of doors one is trying to install.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Let us look in to the two main types of doors available today. Top hung Sliding Doors This is the most commonly used type of sliding doors. They are used in commercial places and homes as well. Two trolley hangers are used to hang the door at the top. The hangers take all the weight of the door, which makes the door slide easily without any problems. Track stoppers are fixed on the concealed tracks at both ends. They are responsible to hold the doors at both ends on the track. This type has the maximum weight limit depending on the trolley hangers used. This is the reason most suppliers provide door weights. In simple words, the size of the door matters when using top hung doors.