Olivia Sliding Door April 20th, 2018 - 08:18:40
Timber is a natural sustainable material that is very energy efficient but will require regular maintenance over the life time of the door to maintain their stain or paint finish. ALUMINIUM Aluminium folding sliding doors are normally manufactured from durable, strong thermally broken aluminium profiles that have specifically been designed for the purpose. These systems have been in use for several years in both domestic and commercial installations such as restaurants and hotels. Most systems utilise bottom rolling gear so all the weight is carried at the bottom with guide rollers at the top and panels are often connected to sliding and floating mullions which help ensure the door operates smoothly and effortlessly.
Let us look in to the two main types of doors available today. Top hung Sliding Doors This is the most commonly used type of sliding doors. They are used in commercial places and homes as well. Two trolley hangers are used to hang the door at the top. The hangers take all the weight of the door, which makes the door slide easily without any problems. Track stoppers are fixed on the concealed tracks at both ends. They are responsible to hold the doors at both ends on the track. This type has the maximum weight limit depending on the trolley hangers used. This is the reason most suppliers provide door weights. In simple words, the size of the door matters when using top hung doors.
There may be a few technical differences but logically they work the same, sometimes called a patio door when they open to the outside. 8. Bypass - the same as mirror bypass doors, without the reflective bits. 9. Louvered or shuttered doors are commonly installed for use with storage closets, utility rooms and pantries. They usually have two that bend inward when you open them, like a cats hind leg, and have the look of functional shutters. 10. Pocket - These bedroom sliding doors are used mostly for spaces that wont fit a hinged door. These slide into the interior of the wall and are sometimes difficult to pull back out if you dont know how to work the little flap of metal that makes up the handle.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.