Olivia Sliding Door April 14th, 2018 - 12:52:08
Lubricate the tracks - Apart from ensuring that the sliding door tracks and rollers are clean, you should also apply lubrication to the lower and upper tracks for a free operation. You can also lubricate the door lock using an aerosol lubricant so you can flush out grime and coat moving parts within it. You would need to disassemble the lock to lubricate it; you can have a professional do it for you if you are not very sure. Install a commercial lock - Commercial entrance sliding doors deserve a commercial lock to improve reliability and security. The lock can be used as a replacement for the latch lock or supplement for the same and can be installed at any given door height and adjusted accordingly. The locks feature two or one bolt locking systems which attach to closure points and steel bolts that drop right into place. You can also go a step further to wire an alarm system to the door.
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturers coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown. Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.
Install slide locking bar - After a long day of automatic door operations, you will need to lock up your doors and have a peaceful nights sleep. By installing a slide locking bar to your sliding doors, you will take security a level higher in your premises. This is usually a metal bar or wood dowel cut to fit on bottom door track. When fitted, it prevents the door open even with the latching lock removed or damaged. Most new sliding door models come secured along the length of the frame so they are more secure even with all the convenience they offer. Maintain and care for the rollers and door tracks - Remember that sliding doors rely on rollers to move back and forth and if they get damaged, then it will be hard for the doors to operate smoothly. Clear out any debris and dirt along the tracks and make any size adjustments if need be. Some of these doors come with adjustment holes on top or bottom edges and you can easily compress or expand the rollers for a smoother operation. The tracks should always be in top shape so it does not become easy for intruders to lift doors off the track and bypassing locks you may have present.
In this type, additional guides are used to prevent it from swinging sideways. The clear threshold guiding is the most commonly used type. This is a plastic guide that is fixed to the surface mainly in the mid range of the track. This prevents it from swinging sideways. In order to prevent lateral movements on it, a groove is cut the bottom that will above the guide install. It is same case with a glass door as well. Indeed, most of the sliding doors used worldwide are made on glass. The glass ones also run through the guide making easy movements. As mentioned above, this is the most commonly used doors in the world. Bottom Rolling Sliding Doors This is the second type of sliding doors used nowadays. This type is used in cases where the top hung doors cannot be used due to weight problems and other reasons. Two rollers are fixed at the bottom of the door. The rollers help the door move smoothly on the track. At the same time, these are guided on the same channel with the help the guides at the top. in this case, all the weight of the door is on the two rollers at the bottom. This makes it harder to open and close. This is the main reason people across the world prefer the top hung ones.