Home / Sliding Door / singular sliding patio door locks photo / Sliding Glass Door Lock Replacement Sliding Glass Door Mortise Lock Replacement Sliding Door Handle Replacement Patio Door Lock Replacement Patio Door Loop Lock
Olivia Sliding Door April 06th, 2018 - 16:35:13
There have been various changes on the how doors are made today. From simple woods to precious glass, these are made using several materials and in different types. However, the most fashionable and commonly used are sliding doors. This type is commonly used in commercial buildings, hotels and offices. Even though people have begun using them at homes, the numbers are very less compared to commercial places. The sliding door opens horizontally on a track. The track below the door is responsible for the sliding facility. The main reason people prefer the sliding door is it increases room space. There are many types of sliding doors available today for homes and commercial places such as Bypass, Arcadia and Pocket doors. At homes, these are commonly used as screen, shower, wardrobe and glass doors. These bring glamour and prestige to your home.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Adapting bulky wide uPVC steel reinforced profiles that were originally designed for traditional hinged external doors meant glass sight lines were considerably reduced and the doors used ugly face fixed hinges and exposed gearing which also sometimes posed a security hazard. However, some manufacturers have started to introduce the next generation of uPVC folding doors using slimmer profiles and concealed gearing that compare favourably with those of timber and aluminium. Heavy steel profile reinforcement is starting to be replaced by lighter yet stronger recycled composite material that is also much more energy efficient.
Folding sliding doors are ideal to use to replace your French or sliding patio doors. This is because they are able to transform the existing space, while opening up that particular room to the outside. These doors have become a popular choice for homeowners to use in new buildings, as well as when building extensions to their homes. These types of doors are also great to use when upgrading your home by adding a conservatory to it. This is because the doors enable you to seamlessly blend your new conservatory with your garden and bring the outdoors into your home. Glass sliding doors also allow for increased inflow of natural light into the home from the outdoors.