Olivia Sliding Door April 06th, 2018 - 16:37:20
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturers coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown. Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
In recent times, folding sliding doors have increased in popularity amongst homeowners the world over. Folding sliding doors enable you to open up a larger part of the wall which may have previously only had a smaller French door. Folding sliding doors are available in a range of construction materials including timber or wood, glass, aluminum or PVC. These doors may be opened either outwards or inwards. If you do decide to go for glass folding sliding doors, it is advisable to select folding sliding doors that are made from toughened glass which will provide you with adequate security and safety. In certain cases, you may find that toughened glass may also be a requirement for building regulations as well. Glass folding doors are ideal for use as patio doors.
Aluminum slide doors uses thermally broken, strong and durable aluminum for this purpose. Such doors have been used in hotels and restaurants since many years. They are the older forms of sliding doors that have been used in both commercial and domestic areas. The system designed for the purpose uses top that has guide rollers and all the weight is put to the bottom. This way smooth operation of opening and closing of door is achieved. It is still one of the most demanded materials for sliding doors as they dont require much maintenance. Plastic or PVC is another popular choice in sliding doors since they are the latest ones. The cost of doors with plastic is the least as compared to other materials. They are the best choice when there is demand of affordable and long lasting doors. At times you will have to compromise with the quality of plastic if you want a good design.