Home / Sliding Door / stupendous exterior sliding door hardware concept / Exterior Sliding Barn Door Track System Barn Sliding Door Hardware Heavy Duty Heavy Duty Sliding Door Tracks And Rollers Sliding Barn Door Track And Rollers
Olivia Sliding Door April 16th, 2018 - 10:45:22
Lubricate the tracks - Apart from ensuring that the sliding door tracks and rollers are clean, you should also apply lubrication to the lower and upper tracks for a free operation. You can also lubricate the door lock using an aerosol lubricant so you can flush out grime and coat moving parts within it. You would need to disassemble the lock to lubricate it; you can have a professional do it for you if you are not very sure. Install a commercial lock - Commercial entrance sliding doors deserve a commercial lock to improve reliability and security. The lock can be used as a replacement for the latch lock or supplement for the same and can be installed at any given door height and adjusted accordingly. The locks feature two or one bolt locking systems which attach to closure points and steel bolts that drop right into place. You can also go a step further to wire an alarm system to the door.
Interior sliding doors are great for partitioning off rooms in the home to create play areas for children. One can also find these types of interior doors in what is called "milk glass". The doors containing the milk glass look great for a closet door. It is highly recommended that when purchasing the "milk glass" interior doors that they are placed where there is not a desire of a lot of sunlight. This type of glass does not allow a lot of light to pass through it, which makes them ideal for closets. Another type of beautiful interior sliding doors are the ones that contain mirrors on them. The mirrors on the doors allow homeowners to utilize their bedroom for dual purposes such as sleeping and dressing. Mirrored sliding doors are popular with homeowners due to the style it contains while adding glamour and sensibility to other rooms in the home.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Let us look in to the two main types of doors available today. Top hung Sliding Doors This is the most commonly used type of sliding doors. They are used in commercial places and homes as well. Two trolley hangers are used to hang the door at the top. The hangers take all the weight of the door, which makes the door slide easily without any problems. Track stoppers are fixed on the concealed tracks at both ends. They are responsible to hold the doors at both ends on the track. This type has the maximum weight limit depending on the trolley hangers used. This is the reason most suppliers provide door weights. In simple words, the size of the door matters when using top hung doors.