Olivia Sliding Door April 22nd, 2018 - 14:29:24
Interior sliding doors are great for partitioning off rooms in the home to create play areas for children. One can also find these types of interior doors in what is called "milk glass". The doors containing the milk glass look great for a closet door. It is highly recommended that when purchasing the "milk glass" interior doors that they are placed where there is not a desire of a lot of sunlight. This type of glass does not allow a lot of light to pass through it, which makes them ideal for closets. Another type of beautiful interior sliding doors are the ones that contain mirrors on them. The mirrors on the doors allow homeowners to utilize their bedroom for dual purposes such as sleeping and dressing. Mirrored sliding doors are popular with homeowners due to the style it contains while adding glamour and sensibility to other rooms in the home.
Homeowners can install mirrored sliding doors on their own while avoiding install fees, which can rack up quickly. Ensure that the bottom and top track is installed. By-pass sliding doors prove easier to install in comparison to bi-fold closet doors. The bi-fold closet doors needs a tighter fit due to the opening of the closet normally being square. If one is attempting to install a bi-fold door in a square opening, the drywall jams will not be consistent. This will cause the doors to not open or close easily, however, there will be horrible looking gaps, which is something that homeowners do not want to see after installing new closet doors.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturers coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown. Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.