Olivia Sliding Door April 21st, 2018 - 13:38:42
These interior doors are not new inventions. Mirrored sliding doors have been around for many years. The doors have evolved from simply placing a large mirror on a closet door with special clips. The evolvement of mirrored closet doors also entails more new and innovative ways in allowing the mirror to show when the closet doors were closed. The old version of these doors hid the mirror from view when closed. Now, the mirrored doors contain beveled edges and grooves which provide more modern looks while allowing the mirror to be viewed at all times, whether the closet is closed or open.
Aluminum is a popular choice for this type of folding door as it is virtually maintenance free, hard wearing and good looking. Aluminum folding sliding doors are available in over 200 different RAL paint finishes which can usually be specified in your choice of matt, silk or gloss finish. It is also possible to specify dual colours with a different colour internally and externally. UPVC Also referred to as plastic or PVC-u folding sliding doors this type of door is relatively new in the market place when compared to aluminum or timber. Due to its comparative low cost uPVC door manufacturers have quickly adapted their existing uPVC door profiles to create bi folding doors in response to an increasingly growing market that required a more affordable folding door system. uPVC folding sliding doors can be substantially cheaper than their aluminum or timber counterparts but there is often a trade-off in design elements that can sometimes compromise the quality of the product.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Are you planning to buy sliding doors, and dont know if you should go for patio doors or sliding ones? If so, we may help you. The basic difference between a patio door and a sliding door is that a patio one swings while a sliding one slides. Typically, a sliding door features a matching panel and a sliding panel. The matching panel slides in the bottom and top tracks. On the other hand, a patio door is a pair of doors and features a fixed panel and a hinged panel. Based on the type you want to buy, it will either swing outward or inward. Lets find out more about it. At times, patio doors are also referred to as French doors. They feature a pair of patio doors hinging at the opposite sides. When opened, they show a large entrance. Normally, patio doors and sliders are bought as a complete system, which includes threshold, jambs and other essential weather-stripping. For energy saving, they tend to interlock.