Olivia Sliding Door April 04th, 2018 - 20:03:16
Let us look in to the two main types of doors available today. Top hung Sliding Doors This is the most commonly used type of sliding doors. They are used in commercial places and homes as well. Two trolley hangers are used to hang the door at the top. The hangers take all the weight of the door, which makes the door slide easily without any problems. Track stoppers are fixed on the concealed tracks at both ends. They are responsible to hold the doors at both ends on the track. This type has the maximum weight limit depending on the trolley hangers used. This is the reason most suppliers provide door weights. In simple words, the size of the door matters when using top hung doors.
TIMBER You can choose from a number of engineered timber folding sliding doors including softwood or hardwoods such as Meranti and European Oak. Timber is normally engineered or laminated to ensure it is structurally resistant to warping or twisting and doors are normally available with either a factory applied translucent stain or RAL colour paint finish. As timber is a natural insulator timber folding sliding doors offer the most energy efficient solution when combined with high performance double glazing offering U values as low as 1.4. Timber folding doors usually provide slim sight lines as the individual door panels are normally hinged off each other without the use of additional mullions between each panel and therefore maximising visible glass areas.
Homeowners can install mirrored sliding doors on their own while avoiding install fees, which can rack up quickly. Ensure that the bottom and top track is installed. By-pass sliding doors prove easier to install in comparison to bi-fold closet doors. The bi-fold closet doors needs a tighter fit due to the opening of the closet normally being square. If one is attempting to install a bi-fold door in a square opening, the drywall jams will not be consistent. This will cause the doors to not open or close easily, however, there will be horrible looking gaps, which is something that homeowners do not want to see after installing new closet doors.
Take out the dimensions of the dimensions where you want to get a door. Make sure that the base and sides are leveled and there is nothing coming in the way. Then take your information to a lumberyard or local home improvement association so that you have a customized door with slide mechanism. There you will have a wide variety to choose from. There are finished as well as unfinished sliding doors available. You should choose the one that is best for your home décor and matches the dimensions of your location. A track is first installed on the location of the door and it is hidden with the decorative item like wood moldings. Also purchase the equipment for installing the sliding door. After bringing the correct sized sliding door in your house.