Olivia Sliding Door May 03rd, 2018 - 13:33:05
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturers coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown. Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.
One can always add mirrors to doors already in place on closets but it is highly recommended that the doors be replaced with a mirrored sliding door kit, which proves better for long-term usage and safety. New mirrored sliding doors are safer in comparison to merely attaching a mirror to the door on the closet. When performing a home improvement project such as this, homeowners should always ensure they do the projects right in the first place. Mistakes can prove costly when trying to install new closet doors, regardless of the types of doors one is trying to install.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
There are numerous benefits of the sliding door system: The system allows swinging the doors for opening and closing. Flexible doors can be fully or partially open to enjoy the sunshine and allow air to flow into the home from the outside. A single door can be created with the number of panels, which stack to one side as a space saving feature. The system is easy to use allowing fast, easy usage of the door when opening or closing.Outward and inward options are available with the sliding door system. Variations consist of center pivot options and paired panel configurations. Homeowners should always ensure that they are familiar with the number of panels in wall openings, which will determine the height, and width of the panels as well as the design. There is a maximum limit of six hinged panels with the system that stacks to one side while allowing a maximum width of thirty-six feet for exterior usage and forty feet for interior usage. If you want to utilize a top-hung door system minus unhinged panels, the number of panels is unlimited.