Olivia Sliding Door April 07th, 2018 - 13:32:53
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturers coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown. Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.
Sliding doors are very convenient entrance options, especially for commercial areas that experience heavy traffic. Most homeowners also find the automatic entrance doors beneficial in different areas on their properties. There are so many styles you can choose from and when you have your sliding door in place, the next thing you ought to do is ensure that they remain functional and reliable. This could mean putting in additional safety measures on the doors and maintaining the parts so you keep jams minimal. Test existing lock - Most sliding doors come with a lock on one side to hold the door to the frame. Ensure that the lock does function properly and always repair or make replacements as necessary. A professional door installer can help you ensure that the frame remains secure and level so you know you can fully rely on the sliding door lock.
In this type, additional guides are used to prevent it from swinging sideways. The clear threshold guiding is the most commonly used type. This is a plastic guide that is fixed to the surface mainly in the mid range of the track. This prevents it from swinging sideways. In order to prevent lateral movements on it, a groove is cut the bottom that will above the guide install. It is same case with a glass door as well. Indeed, most of the sliding doors used worldwide are made on glass. The glass ones also run through the guide making easy movements. As mentioned above, this is the most commonly used doors in the world. Bottom Rolling Sliding Doors This is the second type of sliding doors used nowadays. This type is used in cases where the top hung doors cannot be used due to weight problems and other reasons. Two rollers are fixed at the bottom of the door. The rollers help the door move smoothly on the track. At the same time, these are guided on the same channel with the help the guides at the top. in this case, all the weight of the door is on the two rollers at the bottom. This makes it harder to open and close. This is the main reason people across the world prefer the top hung ones.
TIMBER You can choose from a number of engineered timber folding sliding doors including softwood or hardwoods such as Meranti and European Oak. Timber is normally engineered or laminated to ensure it is structurally resistant to warping or twisting and doors are normally available with either a factory applied translucent stain or RAL colour paint finish. As timber is a natural insulator timber folding sliding doors offer the most energy efficient solution when combined with high performance double glazing offering U values as low as 1.4. Timber folding doors usually provide slim sight lines as the individual door panels are normally hinged off each other without the use of additional mullions between each panel and therefore maximising visible glass areas.