Olivia Sliding Door April 22nd, 2018 - 14:21:08
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
These are not only for places where you need wider place but they are also perfect for places where you need more sun light and fresh area. They give wider space for entry of light and air. The glass used in new innovative slide doors can help in reducing the heating losses as they provide efficient solar gain. When you go to buy these doors then you have ample number of choices in the material and color. There are materials like timber, PVC, aluminum etc.Timber has been used largely with both hardwood and softwood in places where one wants the structure to be resistant against twisting or warping. You find these sliding doors with RAL paint or translucent strain finish. These are very good insulators and therefore efficient energy solution as timber is well known for being a good natural insulator. Good care is taken to maximize the area of glass and reduce the area of panel and framing.
Let us look in to the two main types of doors available today. Top hung Sliding Doors This is the most commonly used type of sliding doors. They are used in commercial places and homes as well. Two trolley hangers are used to hang the door at the top. The hangers take all the weight of the door, which makes the door slide easily without any problems. Track stoppers are fixed on the concealed tracks at both ends. They are responsible to hold the doors at both ends on the track. This type has the maximum weight limit depending on the trolley hangers used. This is the reason most suppliers provide door weights. In simple words, the size of the door matters when using top hung doors.
Vinyl-covered sliding wardrobe door Vinyl is a excellent material for fences, but they also make terrific wardrobe doors. These doors are gyp rock panels that are covered with vinyl for a smooth, glossy look. They are paired with aluminium frames and tracks. They slide in easily because theyre quite light. Mirrored sliding wardrobe door If you want a door with a dual purpose - to seal your wardrobe and to serve as a full-length mirror - youll want to have a mirrored sliding door. These mirrored glass panels are convenient and safe to slide. Mirrors also give the illusion of a wider space in the room, so its perfect for rooms that are quite small. These come with aluminium frames, or you can go frameless.