Home / Sliding Door / top-notch sliding closet door handles photo / How To Install Barn Door Handles Oil Rubbed Bronze Closet Door Knobs Flush Mount Door Knob Bifold Closet Door Hardware Bypass Door Track
Olivia Sliding Door April 22nd, 2018 - 14:23:23
Lubricate the tracks - Apart from ensuring that the sliding door tracks and rollers are clean, you should also apply lubrication to the lower and upper tracks for a free operation. You can also lubricate the door lock using an aerosol lubricant so you can flush out grime and coat moving parts within it. You would need to disassemble the lock to lubricate it; you can have a professional do it for you if you are not very sure. Install a commercial lock - Commercial entrance sliding doors deserve a commercial lock to improve reliability and security. The lock can be used as a replacement for the latch lock or supplement for the same and can be installed at any given door height and adjusted accordingly. The locks feature two or one bolt locking systems which attach to closure points and steel bolts that drop right into place. You can also go a step further to wire an alarm system to the door.
Ask the manufacturer for advices on installing this door like from top to down. Instead of attaching them with hinges you will have to attach wheels on the sides of the doors so that they easily slide back and forth.After doing the above procedures, move your sliding door a couple of times and check whether any adjustment needs to be made or not. Make sure if the adjustments needs to be made in the door or in the track. Then get done with it and make your sliding door smoother. These doors will surely look elegant in your house. However, if you have children at your house then you need to be careful as they like to slide the doors a lot and there are chances that their fingers might get stuck in this process.
Sliding-type doors are not just limited to doorways but are also installed as cabinet doors, closet doors, and balcony or patio doors and also as room dividers. They are built with different materials such as metals and glass. Glass gives the illusion of a bigger space since it lets you look over to the other side. Sliding-type doors may be all clear, frosted, translucent and may have etchings or printed designs. Customization for sliding doors is endless. Slide doors never go out of style. Since they are functional and highly customizable, they will never be passé. Getting a slide-type door is easy to maintain and can easily blend in with the theme of the room. Whether in a modern or traditional setting, sliding-type doors will still be able to blend in. Should you wish to change the design, there are easy tips and tricks on how to jazz up an old sliding door to make it look new again.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.