Home / Sliding Door / top-notch sliding door handle with lock photo / Types Of Sliding Glass Door Locks Patio Door Lock Home Depot Sliding Door Loop Lock Sliding Patio Door Lock Sliding Door Loop Lock Home Depot
Olivia Sliding Door April 20th, 2018 - 08:14:29
In this type, additional guides are used to prevent it from swinging sideways. The clear threshold guiding is the most commonly used type. This is a plastic guide that is fixed to the surface mainly in the mid range of the track. This prevents it from swinging sideways. In order to prevent lateral movements on it, a groove is cut the bottom that will above the guide install. It is same case with a glass door as well. Indeed, most of the sliding doors used worldwide are made on glass. The glass ones also run through the guide making easy movements. As mentioned above, this is the most commonly used doors in the world. Bottom Rolling Sliding Doors This is the second type of sliding doors used nowadays. This type is used in cases where the top hung doors cannot be used due to weight problems and other reasons. Two rollers are fixed at the bottom of the door. The rollers help the door move smoothly on the track. At the same time, these are guided on the same channel with the help the guides at the top. in this case, all the weight of the door is on the two rollers at the bottom. This makes it harder to open and close. This is the main reason people across the world prefer the top hung ones.
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturers coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown. Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.
Although the original concept of a folding sliding door dates back over 100 years where they were often used for closing off small storage areas todays folding sliding doors are designed to be high performance energy efficient patio doors using the latest innovative insulation features in both door and glazing construction. Folding sliding doors not only allow wider unobstructed apertures but the increased glass area allows huge flows of natural light to enter the home from the outside which during the colder months will provide efficient use of solar gain to minimise heating costs. Doors are available in a choice of materials including timber, aluminium and PVC-u together with a choice of colours and finishes that will enhance any home.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.