Olivia Sliding Door May 03rd, 2018 - 13:39:57
Are you planning to buy sliding doors, and dont know if you should go for patio doors or sliding ones? If so, we may help you. The basic difference between a patio door and a sliding door is that a patio one swings while a sliding one slides. Typically, a sliding door features a matching panel and a sliding panel. The matching panel slides in the bottom and top tracks. On the other hand, a patio door is a pair of doors and features a fixed panel and a hinged panel. Based on the type you want to buy, it will either swing outward or inward. Lets find out more about it. At times, patio doors are also referred to as French doors. They feature a pair of patio doors hinging at the opposite sides. When opened, they show a large entrance. Normally, patio doors and sliders are bought as a complete system, which includes threshold, jambs and other essential weather-stripping. For energy saving, they tend to interlock.
Homeowners can install mirrored sliding doors on their own while avoiding install fees, which can rack up quickly. Ensure that the bottom and top track is installed. By-pass sliding doors prove easier to install in comparison to bi-fold closet doors. The bi-fold closet doors needs a tighter fit due to the opening of the closet normally being square. If one is attempting to install a bi-fold door in a square opening, the drywall jams will not be consistent. This will cause the doors to not open or close easily, however, there will be horrible looking gaps, which is something that homeowners do not want to see after installing new closet doors.
Let us look in to the two main types of doors available today. Top hung Sliding Doors This is the most commonly used type of sliding doors. They are used in commercial places and homes as well. Two trolley hangers are used to hang the door at the top. The hangers take all the weight of the door, which makes the door slide easily without any problems. Track stoppers are fixed on the concealed tracks at both ends. They are responsible to hold the doors at both ends on the track. This type has the maximum weight limit depending on the trolley hangers used. This is the reason most suppliers provide door weights. In simple words, the size of the door matters when using top hung doors.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.