Olivia Sliding Door April 16th, 2018 - 10:42:20
Lubricate the tracks - Apart from ensuring that the sliding door tracks and rollers are clean, you should also apply lubrication to the lower and upper tracks for a free operation. You can also lubricate the door lock using an aerosol lubricant so you can flush out grime and coat moving parts within it. You would need to disassemble the lock to lubricate it; you can have a professional do it for you if you are not very sure. Install a commercial lock - Commercial entrance sliding doors deserve a commercial lock to improve reliability and security. The lock can be used as a replacement for the latch lock or supplement for the same and can be installed at any given door height and adjusted accordingly. The locks feature two or one bolt locking systems which attach to closure points and steel bolts that drop right into place. You can also go a step further to wire an alarm system to the door.
Not all patio doors are designed for outdoor use. The purpose of the interior type is to join one room to another. They separate one room from another when closed and offer access to the rooms when opened. Single or Multiple Glass Panes True French doors feature several glass panes divided by muntins made from wood. The glass panes are built separately. In other words, if you place an order for one with 10 wooden doors, they will build it with 10 individual panes, and the panes will be inserted independently. If you want, you can go for this type, but the majority of vendors sell ones with panes that are divided by faux. They feature snap-in wooden grilles, and look very beautiful. However, the cost of making them is lesser. Plus, they are easier to clean when compared to the true divided panes.
Aluminum is an ideal choice for your folding sliding doors as these provide better access than PVC, come with narrower frames and have smaller profiles than wooden frames, thus allowing for unrestricted views. If you are working on a tight budget, you may want to go for the less expensive softwood rather than hardwood. However, hardwood is a more preferable option as it provides better insulation and is much more durable, being able to withstand the vagaries of harsh weather. When selecting the rollers for your folding doors, a good choice of material would be nylon. Unlike steel which is likely to cause wear and tear to your runners, nylon rollers are not likely to cause this and are also less expensive and easier to replace than the runners themselves.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.