Olivia Sliding Door April 15th, 2018 - 13:26:40
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturers coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown. Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.
These interior doors are not new inventions. Mirrored sliding doors have been around for many years. The doors have evolved from simply placing a large mirror on a closet door with special clips. The evolvement of mirrored closet doors also entails more new and innovative ways in allowing the mirror to show when the closet doors were closed. The old version of these doors hid the mirror from view when closed. Now, the mirrored doors contain beveled edges and grooves which provide more modern looks while allowing the mirror to be viewed at all times, whether the closet is closed or open.
In this type, additional guides are used to prevent it from swinging sideways. The clear threshold guiding is the most commonly used type. This is a plastic guide that is fixed to the surface mainly in the mid range of the track. This prevents it from swinging sideways. In order to prevent lateral movements on it, a groove is cut the bottom that will above the guide install. It is same case with a glass door as well. Indeed, most of the sliding doors used worldwide are made on glass. The glass ones also run through the guide making easy movements. As mentioned above, this is the most commonly used doors in the world. Bottom Rolling Sliding Doors This is the second type of sliding doors used nowadays. This type is used in cases where the top hung doors cannot be used due to weight problems and other reasons. Two rollers are fixed at the bottom of the door. The rollers help the door move smoothly on the track. At the same time, these are guided on the same channel with the help the guides at the top. in this case, all the weight of the door is on the two rollers at the bottom. This makes it harder to open and close. This is the main reason people across the world prefer the top hung ones.
A simple solution to this problem is to use a sliding door track kit. These kits are available almost anywhere, from a local hardware store to a large chain store and even online. They are relatively inexpensive and will make your door work like it did when new. The new track is made of stainless steel, which is a more durable and longer lasting metal. In addition, it will not corrode, so your track will last you for years to come. While your door is off, it mint be beneficial to replace the roller as well, to ensure smooth opening and closing. Once you purchase the kit and the new roller cartridge, here are so simple and easy steps to perform to repair your track.