Olivia Sliding Door April 21st, 2018 - 13:26:45
There are numerous benefits of the sliding door system: The system allows swinging the doors for opening and closing. Flexible doors can be fully or partially open to enjoy the sunshine and allow air to flow into the home from the outside. A single door can be created with the number of panels, which stack to one side as a space saving feature. The system is easy to use allowing fast, easy usage of the door when opening or closing.Outward and inward options are available with the sliding door system. Variations consist of center pivot options and paired panel configurations. Homeowners should always ensure that they are familiar with the number of panels in wall openings, which will determine the height, and width of the panels as well as the design. There is a maximum limit of six hinged panels with the system that stacks to one side while allowing a maximum width of thirty-six feet for exterior usage and forty feet for interior usage. If you want to utilize a top-hung door system minus unhinged panels, the number of panels is unlimited.
Let us look in to the two main types of doors available today. Top hung Sliding Doors This is the most commonly used type of sliding doors. They are used in commercial places and homes as well. Two trolley hangers are used to hang the door at the top. The hangers take all the weight of the door, which makes the door slide easily without any problems. Track stoppers are fixed on the concealed tracks at both ends. They are responsible to hold the doors at both ends on the track. This type has the maximum weight limit depending on the trolley hangers used. This is the reason most suppliers provide door weights. In simple words, the size of the door matters when using top hung doors.
Homeowners can install mirrored sliding doors on their own while avoiding install fees, which can rack up quickly. Ensure that the bottom and top track is installed. By-pass sliding doors prove easier to install in comparison to bi-fold closet doors. The bi-fold closet doors needs a tighter fit due to the opening of the closet normally being square. If one is attempting to install a bi-fold door in a square opening, the drywall jams will not be consistent. This will cause the doors to not open or close easily, however, there will be horrible looking gaps, which is something that homeowners do not want to see after installing new closet doors.
Lubricate the tracks - Apart from ensuring that the sliding door tracks and rollers are clean, you should also apply lubrication to the lower and upper tracks for a free operation. You can also lubricate the door lock using an aerosol lubricant so you can flush out grime and coat moving parts within it. You would need to disassemble the lock to lubricate it; you can have a professional do it for you if you are not very sure. Install a commercial lock - Commercial entrance sliding doors deserve a commercial lock to improve reliability and security. The lock can be used as a replacement for the latch lock or supplement for the same and can be installed at any given door height and adjusted accordingly. The locks feature two or one bolt locking systems which attach to closure points and steel bolts that drop right into place. You can also go a step further to wire an alarm system to the door.