Olivia Sliding Door April 06th, 2018 - 04:18:59
In this type, additional guides are used to prevent it from swinging sideways. The clear threshold guiding is the most commonly used type. This is a plastic guide that is fixed to the surface mainly in the mid range of the track. This prevents it from swinging sideways. In order to prevent lateral movements on it, a groove is cut the bottom that will above the guide install. It is same case with a glass door as well. Indeed, most of the sliding doors used worldwide are made on glass. The glass ones also run through the guide making easy movements. As mentioned above, this is the most commonly used doors in the world. Bottom Rolling Sliding Doors This is the second type of sliding doors used nowadays. This type is used in cases where the top hung doors cannot be used due to weight problems and other reasons. Two rollers are fixed at the bottom of the door. The rollers help the door move smoothly on the track. At the same time, these are guided on the same channel with the help the guides at the top. in this case, all the weight of the door is on the two rollers at the bottom. This makes it harder to open and close. This is the main reason people across the world prefer the top hung ones.
TIMBER You can choose from a number of engineered timber folding sliding doors including softwood or hardwoods such as Meranti and European Oak. Timber is normally engineered or laminated to ensure it is structurally resistant to warping or twisting and doors are normally available with either a factory applied translucent stain or RAL colour paint finish. As timber is a natural insulator timber folding sliding doors offer the most energy efficient solution when combined with high performance double glazing offering U values as low as 1.4. Timber folding doors usually provide slim sight lines as the individual door panels are normally hinged off each other without the use of additional mullions between each panel and therefore maximising visible glass areas.
Lubricate the tracks - Apart from ensuring that the sliding door tracks and rollers are clean, you should also apply lubrication to the lower and upper tracks for a free operation. You can also lubricate the door lock using an aerosol lubricant so you can flush out grime and coat moving parts within it. You would need to disassemble the lock to lubricate it; you can have a professional do it for you if you are not very sure. Install a commercial lock - Commercial entrance sliding doors deserve a commercial lock to improve reliability and security. The lock can be used as a replacement for the latch lock or supplement for the same and can be installed at any given door height and adjusted accordingly. The locks feature two or one bolt locking systems which attach to closure points and steel bolts that drop right into place. You can also go a step further to wire an alarm system to the door.
Although the original concept of a folding sliding door dates back over 100 years where they were often used for closing off small storage areas todays folding sliding doors are designed to be high performance energy efficient patio doors using the latest innovative insulation features in both door and glazing construction. Folding sliding doors not only allow wider unobstructed apertures but the increased glass area allows huge flows of natural light to enter the home from the outside which during the colder months will provide efficient use of solar gain to minimise heating costs. Doors are available in a choice of materials including timber, aluminium and PVC-u together with a choice of colours and finishes that will enhance any home.