Olivia Sliding Door April 06th, 2018 - 17:29:03
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
There have been various changes on the how doors are made today. From simple woods to precious glass, these are made using several materials and in different types. However, the most fashionable and commonly used are sliding doors. This type is commonly used in commercial buildings, hotels and offices. Even though people have begun using them at homes, the numbers are very less compared to commercial places. The sliding door opens horizontally on a track. The track below the door is responsible for the sliding facility. The main reason people prefer the sliding door is it increases room space. There are many types of sliding doors available today for homes and commercial places such as Bypass, Arcadia and Pocket doors. At homes, these are commonly used as screen, shower, wardrobe and glass doors. These bring glamour and prestige to your home.
If you are thinking of replacing your doors then sliding doors are a very good option. They are a very modern piece of art and give the house a very gentle and sophisticated look. Opening and closing a door can be quite irritating sometimes but by having sliding doors, this problem will be solved as by a single slide you will acquire what you want. They come in a variety of designs like glass, wooden, vinyl etc. This type of doors is best for people who live in small houses. They can save up a lot of space. These doors do not cover a lot of floor and thus you can bring in more furniture in the room. If you want to install a door that can slide in your house then follow these instructions:
A simple solution to this problem is to use a sliding door track kit. These kits are available almost anywhere, from a local hardware store to a large chain store and even online. They are relatively inexpensive and will make your door work like it did when new. The new track is made of stainless steel, which is a more durable and longer lasting metal. In addition, it will not corrode, so your track will last you for years to come. While your door is off, it mint be beneficial to replace the roller as well, to ensure smooth opening and closing. Once you purchase the kit and the new roller cartridge, here are so simple and easy steps to perform to repair your track.