Olivia Sliding Door April 23rd, 2018 - 14:03:23
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturers coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown. Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.
There have been various changes on the how doors are made today. From simple woods to precious glass, these are made using several materials and in different types. However, the most fashionable and commonly used are sliding doors. This type is commonly used in commercial buildings, hotels and offices. Even though people have begun using them at homes, the numbers are very less compared to commercial places. The sliding door opens horizontally on a track. The track below the door is responsible for the sliding facility. The main reason people prefer the sliding door is it increases room space. There are many types of sliding doors available today for homes and commercial places such as Bypass, Arcadia and Pocket doors. At homes, these are commonly used as screen, shower, wardrobe and glass doors. These bring glamour and prestige to your home.
Lubricate the tracks - Apart from ensuring that the sliding door tracks and rollers are clean, you should also apply lubrication to the lower and upper tracks for a free operation. You can also lubricate the door lock using an aerosol lubricant so you can flush out grime and coat moving parts within it. You would need to disassemble the lock to lubricate it; you can have a professional do it for you if you are not very sure. Install a commercial lock - Commercial entrance sliding doors deserve a commercial lock to improve reliability and security. The lock can be used as a replacement for the latch lock or supplement for the same and can be installed at any given door height and adjusted accordingly. The locks feature two or one bolt locking systems which attach to closure points and steel bolts that drop right into place. You can also go a step further to wire an alarm system to the door.
Are you planning to buy sliding doors, and dont know if you should go for patio doors or sliding ones? If so, we may help you. The basic difference between a patio door and a sliding door is that a patio one swings while a sliding one slides. Typically, a sliding door features a matching panel and a sliding panel. The matching panel slides in the bottom and top tracks. On the other hand, a patio door is a pair of doors and features a fixed panel and a hinged panel. Based on the type you want to buy, it will either swing outward or inward. Lets find out more about it. At times, patio doors are also referred to as French doors. They feature a pair of patio doors hinging at the opposite sides. When opened, they show a large entrance. Normally, patio doors and sliders are bought as a complete system, which includes threshold, jambs and other essential weather-stripping. For energy saving, they tend to interlock.