Olivia Sliding Door May 03rd, 2018 - 13:36:49
These interior doors are not new inventions. Mirrored sliding doors have been around for many years. The doors have evolved from simply placing a large mirror on a closet door with special clips. The evolvement of mirrored closet doors also entails more new and innovative ways in allowing the mirror to show when the closet doors were closed. The old version of these doors hid the mirror from view when closed. Now, the mirrored doors contain beveled edges and grooves which provide more modern looks while allowing the mirror to be viewed at all times, whether the closet is closed or open.
1. Firstly take the slider door off the track and place it to the side. This many require a little muscle, but is easy enough to do. If you are unable, try turning the screws on the rollers clockwise and then lift the door from its frame. 2. Clean the track with soapy water and a wire brush. 3. Take a metal file and file down and rough spots or ridge that are sharp to the touch. 4. Measure the length of the old track. 5. Cut the new stainless steel track to this length. 6. Place the new track on the old aluminum track. It will snap over the old track and then with light dabs of glue, glue down on the threshold. 7. Lubricate the new track for smooth opening and closing 8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw. 9. Re-install the sliding door and test the opening and closing. As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturers coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown. Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.
TIMBER You can choose from a number of engineered timber folding sliding doors including softwood or hardwoods such as Meranti and European Oak. Timber is normally engineered or laminated to ensure it is structurally resistant to warping or twisting and doors are normally available with either a factory applied translucent stain or RAL colour paint finish. As timber is a natural insulator timber folding sliding doors offer the most energy efficient solution when combined with high performance double glazing offering U values as low as 1.4. Timber folding doors usually provide slim sight lines as the individual door panels are normally hinged off each other without the use of additional mullions between each panel and therefore maximising visible glass areas.